sales@gjsteel.com 1.800.FAB.TUBE

Tube Bending

Tube Bending
Tube Bending

G & J Steel & Tubing, Inc. can do compression and rotary draw bending, enabling us to provide high quality bent parts at the lowest cost to our customers. Mandrel bending is available for tight CLR (centerline radius) bending requirements. All materials are available including aluminum, carbon steel and stainless steel. Fully automated 3-axis and 6-axis CNC benders produce high volume, low cost and accurate parts. X,Y,Z coordinate Bend programming interfaces with our Tube CMM (coordinate measuring machine) to maintain highest repeatability of production lots and to ensure adherence to your design specifications.

Our bent tubes are used in everything from general purpose handles to specialized medical, dental and surgical tubular parts. We also make return bends built to your specifications.

Request Quote

Tube Bending Compression Specifications

Outside Diameter
0.125 to 2.000 Inch
Wall Thickness
0.010 to 0.125 Inch
Workable Materials
Aluminum
Brass
Carbon Steel
Copper
Nickel & Ni Alloys
Stainless Steel
Tolerance
± .015"
Tighter tolerance available upon request
Production Rate
100 to 700 pieces/hour
Production Rate Variables
OD, bend configuration, CLR, blank length, number of bends
Workpiece Type
Coils
Straight Lengths
Cleanliness
No lubrication used except for Rotary Draw bending with a mandrel. These parts may require oil removal based upon customer application.
Equipment
3 Axis Automated Rotary Draw
6 Axis CNC AutoBend
Hydraulic Rotary Draw
Pneumatic Compression
Press Benders
Industries Served
Aerospace & Aircraft
Air Compressor
Air Conditioner
Automotive
Beverage
Electronics
Engine
Gas & Appliance
Heat Exchanger
OEM
Utility (Power/Sewer/Water)

Rotary Draw Specifications

Outside Diameter
0.10 to 2.00 Inch
Wall Thickness
(Including solid bar) Inch
0.010 to 0.125 Inch
Workable Materials
Aluminum
Brass
Carbon Steel
Copper
Cu Ni
Kovar
Nickel & Ni Alloys
Rodar
Stainless Steel
Titanium
Tolerance
± .010"
Tighter tolerance available upon request
Production Rate
100 to 400 pieces/hour
Production Rate Variables
OD, bend configuration, CLR, blank length, number of bends
Cleanliness
Lubricant may need to be removed
Comment
Mandrel bending available
Equipment
3 Axis Automated Rotary Draw
6 Axis CNC AutoBend
Hydraulic Rotary Draw
Pneumatic Compression
Press Benders
Industries Served
Aerospace & Aircraft
Air Compressor
Air Conditioner
Automotive
Beverage
Electronics
Engine
Gas & Appliance
Heat Exchanger
OEM
Utility (Power/Sewer/Water)
^